B-Thin glass tempering system
Glass thickness--From 2.5mm to 19mm
Pass-through chiller is designed to save quenching power and temper thin glass at full load with limited fan power.
In case of super-thin (1/8” minus, thin glass models only) glass tempering furnace, the pass-through zone(s) is further divided into more sub-zones to create a pressure gradient so as to improve quenching power concentration. With limited quenching power, the furnace can temper super thin glass at full load.
Chillers that can temper super thin glass have high-stream nozzles in high pressure zone(s). Such nozzles can produce concentrated air streams to create very rapid quenching effect.
Basic Technical Data of DTB Glass Tempering Lines
Model
Max. Glass
Size (mm)
Min Glass
Size (mm)
Glass
Thickness
(mm)
Production Rate
(5mm,batch/hour)
PG1224DTB
1220x2440
100 x 300
3 ~ 19
18.2
PG1524DTB
1525x2440
100 x 300
3 ~ 19
18.2
PG1530DTB
1525x3050
100 x 300
3 ~ 19
18
PG1536DTB
1525x3660
100 x 300
3 ~ 19
17.8
PG1830DTB
1830x3050
100 x 350
3 ~ 19
18
PG1836DTB
1830x3660
100 x 350
3 ~ 19
17.8
PG2136DTB
2135x3660
100 x 350
3 ~ 19
17.8
PG2142DTB
2135x4270
100 x 350
3 ~ 19
17.6
PG2150DTB
2135x5000
100 x 350
3 ~ 19
17.4
PG2436DTB
2440x 3660
100 x 350
3 ~ 19
17.8
PG2442DTB
2440x4270
100 x 350
3 ~ 19
17.6
PG2550DTB
2500x5000
100 x 350
3 ~ 19
17.4
PG2560DTB
2500x6100
100 x 350
3 ~ 19
17.1
Data shown here are for sales reference only and have no contractual obligations.